For Sale-1990 Miata V8...to be completed.


I'm entertaining all reasonable offers for ownership of my partially completed V8 conversion/ rotisserie restoration, complete "rolling chassis", utilizing Martin Wilson's v8 CONVERSION KIT.
The former 4 cyl. 1990 Miata w/hardtop. - Red- 89,000 miles purchased from the original owner, this became a "time-is-of-no-concern" venture I started several (a bunch-a) years ago, and have since lost motivation..., I have decided to move-on.

- Underside, firewall modification, rear sub-frame & chassis rails completed.
- Have full drivetrain & motor (Stock 5.0 ltr. Ford '87-'86) complete wiring
harness.
- Martin Wilson's (a.k.a. PANACHE) V8 CONVERSION KIT...complete-
w/headers, Alum. Rad., 3.27lsd. Diff., etc.-
- Clean N.J. title- in hand.

I've posted some pictures @ http://www.flickr.com/photos/wingnut757/

For further info/questions/details, please contact me, I'll be happy to answer any of your questions. - (number and email removed jan 29 2012)

Thanks, Lou G.-in N.J.

 

How much for it?

 

Update- Please Note:

I've checked my records and the 5.0 ltr. Motor/ 5spd Drivetrain/harness/ECU is from a
'90 Mustang. (memory fail= mine!).
Reminder; P.M. me for serious inquiries only.

Thanks Lou G. in N.J.

 

pm sent

 

Update- Please Note:

($5,500) I'm entertaining all reasonable offers for ownership of my partially completed V8 conversion/ rotisserie restoration, complete "rolling chassis", utilizing Martin Wilson's v8 CONVERSION KIT.
The former 4 cyl. 1990 Miata w/hardtop. - Red- 89,000 miles purchased from the original owner, this became a "time-is-of-no-concern" venture I started several (a bunch-a) years ago, and have since lost motivation..., I have decided to move-on.

- Underside, firewall modification, rear sub-frame & chassis rails completed.
- Have full drivetrain & motor (Stock 5.0 ltr. from a [formerly] running '90 Mustang GT) with complete wiring-harness, ECU. & "kit modified" oil pan.
- Martin Wilson's (a.k.a. PANACHE/ a.k.a. Monster Miata) V8 CONVERSION KIT...complete-
w/headers, Aluminum Radiator, 3.27limited slip Differential, front springs, -Et al.
- Clean N.J. title- in hand.
** Please note; -Engine & Rear Differential are NOT installed in car, but ready to go.
** Please note; -Wiring harness for V8 is NOT yet adapted to chassis.
** Please note; -Brake & fuel lines to be run.
** Please note; -Car will require new paint.

I've posted some pictures @ http://www.flickr.com/photos/wingnut757/

For further info/questions/details, please contact me, I'll be happy to answer any of your questions. --

Thanks, Lou G. in N.J. (close to PA)

 

The kit alone is $4000.00. Plus you get an engine, differential, wiring harness, & a CAR? That is a hell of a deal. Your fabrication skills look top notch. Somebody should get this!

 

Car is SOLD. 01/28/12
Regards, Wingnut757